Прецизен охладител на статора за LMFA

For the standard variant of the stator precision coolers, matching end blocks are available in sizes 3 to 6, optionally as an end block set with cover strip clamp for the one-piece cover band or without cover strip clamp as a simple end block. For the stator precision coolers in the standard variant, two identical end blocks/end block sets are always required. Each end block has a connection to the machine cooling system. One end block serves as a coolant inlet and distributes the incoming cold coolant to the connected cooling profiles. The second end block at the other end of the stator track recombines the heated coolant flows from the cooling profiles and returns them to the machine cooling system via the cooler connection.

In addition, a special version of the stator precision cooler is available for sizes 3 and 4 of the HIWIN linear motors from the LMFA series. This version is particularly suitable for applications where limited space is available or access is restricted. Two different end blocks are used, one end block has both connections for the coolant inlet and outlet, as well as connections for the cooling profiles. The second end block only has connections for the cooling profiles and conveys the coolant back to the first end block. The cooling lines can thus be shorter and maintenance work on the cooling system is easier to complete as generally only the end block with the cooler connections has to be accessible.

The cooling profiles of the stator precision coolers direct the coolant to the end blocks, transferring heat from the stators to the coolant. In order to satisfy the versatile requirements and different system dimensions, the cooling profiles are available in different lengths and can be plugged into each other using the intuitive plug-in connection to match the length of the stator track.