Części zamienne

Spare part for HM linear modules, HT linear tables and HD double axes with cover strip. The steel cover strip prevents dirt and dust from entering the axis interior.

The magnetic strip is used to hold down the cover strip and is available in a length of 7.5 m.

The belt deflections are used to deflect the cover strip on the HM and HT linear axes. The sets consist of the actual belt deflections as well as the corresponding fastening material. One set is needed per carriage.

Водач на лентата за допълнително насочване на покриващата лента при по-дълги оси. Комплектът се състои от два водача на лентата (достатъчни за една шейна), включително крепителни материали.

The stop buffer serves as a mechanical limit.

Replacement toothed belts for linear modules, linear tables and cantilever axes with belt drive

Drive unit for belt drive axes consisting of toothed belt wheel and ball bearing

The RT belt drive is available for the HM-S linear modules and HT-S linear tables. When selecting the right spare part, attention must be paid to the correct axis designation as well as the selection of the correct type V1 or V2. The model depends on the flange size of the motor attached to the belt drive.

Pneumatic connection (push-in fitting) for actuation of the clamping element. The blind plug is used to close off the hole on the opposite side of the drive block.