High rigidity with mounting holes CRBE: Consisted of an inner ring and an outer ring with mounting holes.
Because there are mounting holes, so it can be fixed directly and it is suitable for rotating of inner ring and outer ring both.
d = inner diameter
D = outer diameter
d0H = diameter of lubrication hole
B, T = width
Part number | Cdyn rad [kN] |
Cdyn ax [kN] |
Cstat rad [kN] |
Cstat ax [kN] |
Tp [Nm] | Max. speed grease [min-1] |
Max. speed oil [min-1] |
Weight [kg] |
---|---|---|---|---|---|---|---|---|
CRBE-02012-A | 8.26 | 18.0 | 9.16 | 20.8 | 0.075 | 1470 | 1970 | 0.30 |
CRBE-03515-A | 18.90 | 42 | 23.40 | 53.0 | 0.25 | 930 | 1250 | 0.65 |
CRBE-05515-A | 21.70 | 48 | 30.60 | 69.0 | 0.4 | 710 | 950 | 0.97 |
CRBE-08022-A | 40.40 | 90 | 63.60 | 144.0 | 1.0 | 480 | 640 | 2.56 |
CRBE-08022-B | 40.40 | 90 | 63.60 | 144.0 | 1.0 | 480 | 640 | 2.56 |
CRBE-08022-C | 40.40 | 90 | 63.60 | 144.0 | 1.0 | 480 | 640 | 2.56 |
CRBE-09025-A | 46.00 | 102 | 80.20 | 182.0 | 1.5 | 400 | 530 | 5.04 |
CRBE-09025-B | 46.00 | 102 | 80.20 | 182.0 | 1.5 | 400 | 530 | 5.04 |
CRBE-09025-C | 46.00 | 102 | 80.20 | 182.0 | 1.5 | 400 | 530 | 5.04 |
CRBE-11528-A | 73.10 | 162 | 131.90 | 300.0 | 2.7 | 330 | 440 | 6.76 |
CRBE-11528-B | 73.10 | 162 | 131.90 | 300.0 | 2.7 | 330 | 440 | 6.76 |
CRBE-11528-C | 73.10 | 162 | 131.90 | 300.0 | 2.7 | 330 | 440 | 6.76 |
CRBE-16035-A | 102.00 | 226 | 192.30 | 437.0 | 4.8 | 260 | 340 | 11.98 |
CRBE-16035-B | 102.00 | 226 | 192.30 | 437.0 | 4.8 | 260 | 340 | 11.98 |
CRBE-16035-C | 102.00 | 226 | 192.30 | 437.0 | 4.8 | 260 | 340 | 11.98 |
CRBE-21040-A | 142.00 | 315 | 286.20 | 650.0 | 8.0 | 200 | 275 | 21.66 |
CRBE-21040-B | 142.00 | 315 | 286.20 | 650.0 | 8.0 | 200 | 275 | 21.66 |
CRBE-21040-C | 142.00 | 315 | 286.20 | 650.0 | 8.0 | 200 | 275 | 21.66 |
Cdyn = dynamic capacity
C0 = static capacity
Tp = friction torque; measured by 30 min-1; lubricated with grease (G05)
Note: The basic loading rates were referred to ISO76 / ISO281